Call Toll Free : 1-800-251-8824
Call Toll Free : 1-800-251-8824


6 Inch Stove Pipe 22 Gauge

We cannot ship any of the items on this page to Alaska, Hawaii, Puerto Rico or Canada.

The highest quality single-wall stove pipe available for coal and wood-burning stoves, fireplaces and central heaters. Unmatched in safety, durability and ease of installation.Made with 22-gauge cold-rolled steel, practically 60% thicker than standard single wall stove pipes.

An invisible seam finishes each connector piece with a high-quality silicone-based black stove paint. Continuous-seam laser welding creates stovepipe you can depend on to fit consistently – because it’s consistently round.

Saf-T Pipe retains its factory-round shape, even when cut. Because this pipe doesn't have to be snapped together, it’s quicker to install – and it can’t come apart, even in case of fire (especially in the case of fire). Joints fit perfectly to ensure tight, safe venting and eliminate the release of soot and flue gas to interior environments.


  • Laser-welded seams
  • Will last longer than standard 24 gauge pipe
  • Inside of each piece painted to prevent flash rust.
  • Beaded for furnace cement
  • High-temperature, low-luster finish
12" Straight Pipe
Use for a single-wall connector pipe. Requires 18” clearance to combustibles.
Black Straight 6 Inch Heavy Stovepipe
6" x 12"
Ocp21110
$19.49
Out of Stock
Available for Backorder

Add to Cart
18" Straight Pipe
Use for a single-wall connector pipe. Requires 18” clearance to combustibles.
Black Straight 6 Inch Heavy Stovepipe
6" x 18"
Ocp21115
$27.49
Out of Stock
Available for Backorder

Add to Cart
24" Straight Pipe
Use for a single-wall connector pipe. Requires 18” clearance to combustibles.
Black Straight 6 Inch Heavy Stovepipe
6" x 24"
Ocp21120
$25.99
Out of Stock
Available for Backorder

Add to Cart
36" Straight Pipe
Use for a single-wall connector pipe. Requires 18” clearance to combustibles.
Black Straight 6 Inch Heavy Stovepipe
6" x 36"
Ocp21125
$36.49
Out of Stock
Available for Backorder

Add to Cart
45 Degree Elbow
Offsets obstructions as needed. Non-adjustable..
6 Inch Black Stovepipe 45 Degree Elbow
6"
Ocp21140
$26.99
Add to Cart
48" Straight Pipe (Case of 4)
Use for a single-wall connector pipe. Requires 18” clearance to combustibles.
Black Straight 6 Inch Heavy Stovepipe
6" x 48"
Ocp21130
$187.49
Add to Cart
90 Degree Elbow
Offsets obstructions as needed. Non-adjustable. Not recommended for rear exit appliances.
6 Inch Black Stovepipe 90 Degree Elbow
6"
Ocp21150
$31.49
Out of Stock
Available for Backorder

Add to Cart
Adjustable Elbow
90° sectioned. Double seams permit each section to turn freely without any danger of becoming disconnected. Can quickly be adjusted to any straight line and a right angle.
Adjustable Stove Pipe Elbow
6"
Ocp21153
$52.99
Add to Cart
Slip Connector
18" length. Use to adapt pipe to ceiling support box or finishing collar. Adds 4” - 16” of length to rigid pipe. Allows drip-free installation without cutting the pipe. Can be used in line to create a telescoping combination when used with a straight length of pipe.
Stove Pipe Slip Connector
6" x 18"
Ocp21170
$28.99
Add to Cart
Tee Cap
Used to close off one end of a stove pipe tee. Use of a tee cap allows for easy access for pipe cleaning.
Stove Pipe Tee Cap
6"
Ocp21165
$26.99
Add to Cart
Tee Connector
Provides a connection between Heat-Fab 22-ga. Black Stovepipe and a tee with a female take-off. 12" long and has two male ends
6 Inch Black Stovepipe Tee Connector
6" x 12"
Ocp21155
$34.49
Add to Cart
Tee Joint
Both sections assembled with "Snap lock" seam. Can be easily turned to make a secure lock.
8 Inch Heat Fab Black Tee
6"
Ocp21160
$39.99
Add to Cart
Telescoping Length
Use for a two-piece installation. Connects directly from stove to ceiling support box or finishing collar. Adjusts from 38"-70". No cutting required.
6 Inch Black Stovepipe Telescoping Length
6" x 38" - 70"
Ocp21135
$77.99
Add to Cart
Trim Collar
Covers excess area around flue opening. Provides a finished look to stove pipe installation.
6 Inch Black Stovepipe Trim Collar
6"
Ocp21105
$17.49
Add to Cart
Black Pipe Flue System Diagram                        install your own woodstove                       HeatFab Stove Pipe

Spacer Line
Customer Reviews
Click here to add a review or comment
StarsStarsStarsStarsStars Excellent experience and product!
Scott Mahle
Built a new tile hearth for my wood burner this spring (Corona Virus boredom) and decided to completely overhaul my Lopi Liberty while I had it out of its home. After a few coats of paint, new fire bricks, a door gasket, new blower, and a lot of elbow grease on the brass I only needed one more item – new stove pipe.

I decided to upgrade to Heat-Fab since it seemed to be better built. After searching on-line for the best price, I came across Woodstove Outlet. I must admit I was a bit hesitant to purchase anything here at first because the website looked like something one of my boys created in school – lesson here, don’t judge a book by its cover! Not only did Woodstove Outlet have the best price I could find, they also had my stovepipe delivered within 3 days of ordering and it was packaged extremely well! No dents, scratches or marks of any kind.

I will not hesitate to shop here again, and for those on the fence and reading this review, go for it! You won’t be sorry!

Signed,
One very satisfied customer tired of supporting the on-line giants.
Posted at 5:21:pm 04/30/20

 

Woodstove Outlet is compliant with the PCI Data Security Standard
We accept all major credit cards