6 Inch Stove Pipe 22 Gauge
We cannot ship any of the items on this page to Alaska, Hawaii, Puerto Rico or Canada.
The highest quality single-wall stove pipe available
for coal and wood-burning stoves, fireplaces and central heaters.
Unmatched in safety, durability and ease of installation.Made
with 22-gauge cold-rolled steel, practically 60% thicker than
standard single wall stove pipes.
An invisible seam finishes each connector piece
with a high-quality silicone-based black stove paint. Continuous-seam
laser welding creates stovepipe you can depend on to fit consistently
– because it’s consistently round.
Saf-T Pipe retains its factory-round shape, even
when cut. Because this pipe doesn't have to be snapped together,
it’s quicker to install – and it can’t come apart,
even in case of fire (especially in the case of fire). Joints
fit perfectly to ensure tight, safe venting and eliminate the
release of soot and flue gas to interior environments.
- Laser-welded seams
- Will last
longer than standard 24 gauge pipe
- Inside of each piece painted to prevent flash rust.
- Beaded for furnace cement
- High-temperature, low-luster finish
12" Straight
Pipe
Use for a single-wall connector pipe. Requires 18” clearance
to combustibles. |
|
|
| |
18" Straight Pipe
Use for a single-wall connector pipe. Requires 18”
clearance to combustibles. |
|
| |
24" Straight Pipe
Use for a single-wall connector pipe. Requires 18” clearance
to combustibles. |
|
|
| |
36" Straight Pipe
Use for a single-wall connector pipe. Requires 18”
clearance to combustibles. |
|
| |
45 Degree Elbow
Offsets obstructions as needed. Non-adjustable.. |
|
|
| |
48" Straight Pipe
(Case of 4)
Use for a single-wall connector pipe. Requires 18”
clearance to combustibles. |
|
6" x 48" |
Ocp21130 |
$322.99 |
|
|
90 Degree Elbow
Offsets obstructions as needed. Non-adjustable. Not recommended
for rear exit appliances. |
|
|
| |
Adjustable Elbow
90° sectioned. Can quickly be adjusted to a straight line, 45 degree angle, or a right angle. |
|
| |
Slip Connector
18" length. Use to adapt pipe to ceiling support box
or finishing collar. Adds 4” - 16” of length to
rigid pipe. Allows drip-free installation without cutting
the pipe. Can be used in line to create a telescoping combination
when used with a straight length of pipe. |
|
|
| |
Tee Cap
Used to close off one end of a stove pipe tee. Use
of a tee cap allows for easy access for pipe cleaning. |
|
| |
Tee Connector
Provides a connection between Heat-Fab 22-ga. Black Stovepipe
and a tee with a female take-off. 12" long and has two
male ends |
|
|
| |
Tee Joint
Both sections assembled with "Snap lock" seam. Can
be easily turned to make a secure lock. |
|
| |
Telescoping Length
Use for a two-piece installation. Connects directly from stove
to ceiling support box or finishing collar. Adjusts from 38"-70".
No cutting required. |
|
|
6" x 38" - 70" |
Ocp21135 |
$114.99 |
|
|
Trim Collar
Covers excess area around flue opening. Provides
a finished look to stove pipe installation. |
|
| |
| |
1. Stick with one brand of stovepipe
for connecting wood stoves to chimney. This ensures the most secure
stovepipe connection. Learn
why a good stovepipe connection is so important.
2. For most stovepipes 3 screws are required to fit each pipe connection
tightly
3. New stovepipe and wood stove installations may smoke a little and
emit an odor when first used. This is normal curing of the paint
on the pipe. Allow ventilation of an open a window or door to allow
the smoke and fumes to escape during the beginning of your first wood burning stove fire.
Never use stovepipe as a chimney or pass it through an unprotected wall.
Return to top of page
|
