Description of available pieces
Straight Pipe -
Constructed with a stainless
steel inner wall for long-lasting performance and safety.
For mobile home installation, follow the appliance manufacturer’s
installation instructions. Features a inner wall of .016
430 alloy stainless steel and an outer wall of .018 aluminized
steel (Outside diameter is 1 1/8" larger than inside
45 degree Elbow
- Offsets obstructions
as needed. Elbow is not adjustable.
90 degree Elbow
- Angles DVL pipe towards
the chimney’s thimble or the appliance flue outlet.
Elbow is not adjustable. Not recommended for rear exit appliances.
Stovetop Adaptor (Starter Pipe) -
DVL pipe to the appliance flue outlet. The overall height
of the adaptor is 4 3/4". When the male end is properly
seated into the flue outlet, 4" of actual connector
length will remain. Item is available with optional damper.
Tee with Clean-Out Cap -
Use with rear
exit appliances and appliances that require a barometric
Telescoping Length -
Great for one piece
installation. Simply adjust to the length you need. Allows
one-piece installation from stove to ceiling support box
or finishing collar. Available in 29"- 48" and
40"- 68" extensions. Easy to install, no cutting
Adjustable Length Pipe -
Double Wall Stove
Pipe cannot be cut and still provide a proper connection
to an adjoining piece of pipe. Available to achieve pipe
length requirements not attainable with fixed lengths of
DVL. There is approximately 3" of adjustment on the
6" length and 7" of adjustment on the 12"
length of pipe. All pieces must have a minimum 1" overlap
with all connecting pipe.
Oval-to-Round Boot -
Connects DVL pipe
to Vermont Castings Stoves with oval flue outlets. 6 5/8"
X 9 1/2" inside diameter. Overall height is 14 1/2".
Installed height is 13 9/16".