Call Toll Free : 1-800-251-8824
Call Toll Free : 1-800-251-8824


8 Inch Double Wall Selkirk Stove Pipe

We cannot ship any of the items on this page to Alaska, Hawaii, Puerto Rico or Canada.

Selkirk's DSP Double Wall Stove Pipe is a connector pipe that links your wood stove to an insulated chimney. Listed & Tested to ULC S641 and UL 103 Standards. Model DSP has an attractive outer black surface made of durable aluminized steel to withstand temperatures up to 1200 degrees F in continuous operation.

  • 430-alloy stainless inner wall, steel outer wall
  • Use with SuperPro and Ultra-Temp factory built chimney
  • Reduces clearances from 18" to 6" for both walls and ceilings
6" Straight Pipe
3 metal screws supplied with each length. For installed length, subtract 1-3/8" per joint..
double wall stove pipe, wood stove pipe
8" x 6"
Ocp77505
$84.49
Add to Cart
12" Straight Pipe
3 metal screws supplied with each length. For installed length, subtract 1-3/8" per joint..
double wall stove pipe, wood stove pipe
8" x 12"
Ocp77510
$112.99
Add to Cart
24" Straight Pipe
3 metal screws supplied with each length. For installed length, subtract 1-3/8" per joint..
double wall stove pipe, wood stove pipe
8" x 24"
Ocp77515
$170.49
Add to Cart
36" Straight Pipe
3 metal screws supplied with each length. For installed length, subtract 1-3/8" per joint..
double wall stove pipe, wood stove pipe
8" x 36"
Ocp77520
$202.49
Add to Cart
45 Degree Elbow
Offsets obstructions as needed. Non-adjustable.
double wall stove pipe, pipe elbow
8"
Ocp77545
$119.99
Add to Cart
90 Degree Elbow
Offsets obstructions as needed. Non-adjustable. Not recommended for rear exit appliances.
double wall stove pipe, pipe elbow
8"
Ocp77550
$214.99
Add to Cart
Damper Kit
Allows the operator to alter the amount of air drawn through the venting system, controlling the stove’s combustion. Must be installed directly on the stove’s flue outlet where applicable. When handle is in horizontal position, the damper is “closed” (reducing combustion). The “closed” position is still 20% open, so the venting system is not completely blocked. When handle is in vertical position, the damper is wide open (no reduction of combustion).
double wall stove pipe, damper kit
8"
Ocp77540
$163.99
Add to Cart
Finishing Band
Used to conceal the crimped end on the last length in the system. When installing, the joints appear to be going the wrong direction with a “male-end-up” connection (this is correct for the outer wall). The finishing band conceals the joints and provides a finished look. 3" high and can be trimmed.
double wall stove pipe, finishing band
3" High
Ocp77375
$23.99
Add to Cart
Reducer
Used to reduce the size of the pipe to the chimney. 8" to 6" inside crimp. Image B.
double wall stove pipe, increaser
6" x 8"-6"
Ocp77570
$166.99
Add to Cart
Masonry Adaptor
For installations through a masonry wall. Used to connect Double Wall Stove Pipe to an existing masonry chimney or a relined masonry chimney with stainless steel liner. Overall length is 12", the part that inserts into the chimney is 8" long.
double wall stove pipe, masonry adaptor
8"
Ocp77555
$93.49
Add to Cart
Stove Adaptor
 May be required to adapt some stove flue outlets to Double Wall Stove Pipe. Use the adaptor to join a tee to the stove on stoves that exhaust to the back.If the stove doesn't have a lip, you can snip the tabs off a flue extension as a splice between the adaptor and stove. 6 inches high.
double wall stove pipe, stove adaptor
8"
Ocp77560
$90.99
Add to Cart
Tee With Cap
Used in conjunction with a vertical insulated chimney to provide easy access for inspection and cleaning.
double wall stove pipe, tee with cap
8"
Ocp77535
$228.49
Add to Cart
Adjustable Length
Includes Finishing Band. Used to adjust pipe to desired length. Eliminates the need to cut pipe. For installed length, subtract 1-3/8" per joint. Adjustable length is 12" to 18".
double wall stove pipe, adjustable length
8" x 12"-18"
Ocp77525
$155.99
Add to Cart
Telescoping Length
Includes Finishing Band. Easily removable for inspection and cleaning. Eliminates the need to cut pipe. For installed length, subtract 1-3/8" per joint. Telescoping length is 38" to 68".
double wall stove pipe, telescoping length
8" x 38"-68"
Ocp77530
$355.49
Add to Cart

Selkirk's Double Wall construction with a 1/4 inch air space between inner and outer pipe walls provides superior insulation value to the Single Wall Pipe. Superior insulation keeps flue temperatures high by enhancing draft, preventing excess smoke and build up of moisture, soot, and creosote. Double Wall Stove Pipe keeps the outer pipe temperatures cooler, which allows pipe to be installed with with a minnimum of 6 inches of clearance to combustible materials, unlike the Single Wall Stove Pipe that requires a minnumem of 18 inches of clearance. The inner liner is made from corrosion resistant 400 series stainless steel. Model DSP is available in a variety of lengths and elbows for easy installation. Telescopic and adjustable lengths are available to eliminate cutting-to-size and allows access to the system for cleaning and inspection. The rich black enamel paint provides a long lasting, bright finish that resists scratches. Please note: Double Wall Stove Pipe cannot be cut and still provide a proper connection to an adjoining piece of pipe. If necessary, use an adjustable length of double wall stove pipe.

Woodstove Outlet is compliant with the PCI Data Security Standard
We accept all major credit cards