Woodstove Outlet
Call Toll Free : 1-800-251-8824
Infinite Menus, Copyright 2006, OpenCube Inc. All Rights Reserved.
Shopping Cart Checkout
Please note: We cannot ship this item to Alaska, Hawaii, Puerto Rico or Canada

8 Inch 22 Gauge Wood Stove Pipe

Saf-T Pipe is the highest quality stove pipe available for coal and wood-burning stoves, fireplaces and central heaters. Manufactured for optimal system performance, Saf-T Pipe is unmatched in safety, durability and ease of installation. Saf-T Pipe is made from 22-gauge cold-rolled steel, which is up to 60% thicker than snap-lock single wall stove pipes. With an invisible seam, finished with high-quality silicone-based black stove paint, it looks as smart as it performs. Decorative, laser-cut wall collars can be specified to finish applications with extra flair.Innovative, efficient technology makes Saf-T Pipe a superior fitting system. Continuous-seam laser welding delivers a product that fits consistently – because it’s consistently round. Saf-T Pipe retains its shape, even when cut. Since Saf-T Pipe doesn’t have to be snapped together, it’s quicker to install – and it can’t come apart, even in case of fire (especially in the case of fire). Joints fit perfectly to ensure tight, safe venting and eliminate the release of soot and flue gas to interior environments. It’s secure, reliable and virtually smoke-free.

  • Laser-welded seams
  • Will last many times longer than 24 gauge pipe
  • Inside of each piece painted to prevent flash rust.
  • Full range of parts and sizes
  • Beaded for furnace cement
  • High-temperature, low-luster finish
  • Individually wrapped
 
12" Straight Pipe
Use for a single-wall connector pipe. Requires 18” clearance to combustibles.
8 Inch Heat Fab Black Stovepipe
8" x 12"
Ocp21310
$24.49
Add to Cart
18" Straight Pipe
Use for a single-wall connector pipe. Requires 18” clearance to combustibles.
8 Inch Heat Fab Black Stovepipe
8" x 18"
Ocp21315
$25.99
Add to Cart

24" Straight Pipe
Use for a single-wall connector pipe. Requires 18” clearance to combustibles.
8 Inch Heat Fab Black Stovepipe
8" x 24"
Ocp21320
$35.49
Add to Cart

36" Straight Pipe
Use for a single-wall connector pipe. Requires 18” clearance to combustibles.
8 Inch Heat Fab Black Stovepipe
8" x 36"
Ocp21325
$50.49
Add to Cart

45 Degree Elbow
Offsets obstructions as needed. Non-adjustable.
8 Inch Heat Fab Black Stovepipe 45 Degree Elbow
8"
Ocp21340
$34.99
Add to Cart

48" Straight Pipe (Case of 2)
Use for a single-wall connector pipe. Requires 18” clearance to combustibles.
8 Inch Heat Fab Black Stovepipe
8" x 48"
Ocp21330
$117.99
Add to Cart

90 Degree Elbow
Offsets obstructions as needed. Non-adjustable. Not recommended for rear exit appliances.
8 Inch Heat Fab Black 90 Degree Corrugated Elbow Nonadjustable
8"
Ocp21350
$35.99
Add to Cart

Adjustable Elbow
90° sectioned. Double seams permit each section to turn freely without any danger of becoming disconnected. Can quickly be adjusted to any straight line and a right angle.
8 Inch Heat Fab Black 90 Degree Sectioned Elbow Adjustable
8"
Ocp21353
$49.49
Add to Cart

Increaser
Easily adapts smaller stove pipe to larger stove pipe. 8" (female) to 6" (male)-male end is crimped.
Heat Fab Black Increaser 8 Inch Female 6 Inch Male
8"
Ocp21380
$27.99
Add to Cart

Oval to Round Offset Boot
Oval-to-8" round offset boot for Vermont Castings Stoves. The oval male end dimension is 53/8" X 93/4". The round female end accepts 8" diameter, 22-ga. stovepipe
Heat Fab Black Oval To 8 Inch Round Offset Boot For Vermont Castings Stove Offset
Ocp21375
$69.99
Add to Cart

Oval to Round Straight Boot
Oval-to-8" round straight boot for Vermont Castings Stoves. The oval male end dimension is 53/8" X 93/4". The round female end accepts 8" diameter, 22-ga. stovepipe
Heat Fab Black Oval To 8 Inch Round Offset Boot For Vermont Castings Stove
Ocp21376
$49.49
Add to Cart

Reducer
Easily adapts large stove pipe to smaller stove pipe. 6" (female) to 8" (male)-male end is crimped.
Heat Fab Black Reducer 8 Inch Male 6 Inch Female
8"
Ocp21180
$31.49
Add to Cart

Slip Connector
18" length. Use to adapt pipe to ceiling support box or finishing collar. Adds 4” - 16” of length to rigid pipe. Allows drip-free installation without cutting the pipe. Can be used in line to create a telescoping combination when used with a straight length of pipe.
8 Inch Heat Fab Black Slip Connector 18 Inch Length
8" x 18"
Ocp21370
$27.99
Add to Cart

Tee Cap
Used to close off one end of a stove pipe tee. Use of a tee cap allows for easy access for pipe cleaning.
8 Inch Heat Fab Black Tee Cover
8"
Ocp21365
$35.49
Add to Cart

Tee Connector
Provides a connection between Heat-Fab 22-ga. Black Stovepipe and a tee with a female take-off. 12" long and has two male ends.
8 Inch Heat Fab Black Tee Connector
8" x 12"
Ocp21355
$44.99
Add to Cart

Tee Joint
Both sections assembled with "Snaplock" seam. Can be easily turned to make a secure lock.
8 Inch Heat Fab Black Tee
8"
Ocp21360
$45.99
Add to Cart

Telescoping Length
Use for a two-piece installation. Connects directly from stove to ceiling support box or finishing collar. Adjusts from 38"-70". No cutting required.
8 Inch Heat Fab Welded Black Stovepipe Adjustable Length
8" x 38" - 70"
Ocp21335
$105.99
Add to Cart

Trim Collar
Covers excess area around flue opening. Provides a finished look to stove pipe installation.
8 Inch Heat Fab Black Trim Collar
8"
Ocp21305
$17.49
Add to Cart
Black Pipe Flue System Diagram                       How To Install Woodstove Pipe                       HeatFab Stove Pipe

Spacer Line
Customer Reviews
Click here to add a review or comment
There are no comments to display

 

Black 8 inch 22 Gauge HeatFab Saf-T Pipe Single Wall Stove Pipe