(Show All)
(Show All)
| 12" Straight
Pipe Self-locking pipe presses together until it snaps. No tools needed to close seams. Joint can be cut to any length. |
||||
|
|
||||
|
24" Straight
Pipe Self-locking pipe presses together until it snaps. No tools needed to close seams. Joint can be cut to any length. |
||||
|
||||
|
Adjustable Elbow Double seams permit each section to turn freely without any danger of becoming disconnected. Can quickly be adjusted to any straight line and a right angle. |
||||
|
||||
|
|
90° Elbow Corrugated lock seamed, one piece construction. Lock seamed for strength and to prevent coming apart. 2 1/2" ends. |
||||
|
||||
|
Trim Cap Used to close off one end of a stove pipe tee. Use of a tee cap allows for easy access for pipe cleaning. |
||||
|
||||
|
| Increaser From 7" to 8" pipe Easily adapts smaller stove pipe to larger stove pipe. Large end of Increaser is crimped. |
||||
|
|
||||
|
Reducer From 7" to 6" pipe Easily adapts large stove pipe to smaller stove pipe. Small end of Reducer is crimped. |
||||
|
||||
|
Draw Band Connector is used when the flue collar of a stove is a bit too big. |
||||
|
||||
|
Trim Collar Covers excess area around flue opening. Provides a finished look to stove pipe installation. |
||||
|
||||
|
| Oval to Round Boot is 7" high with a 6" round end. The oval end is approximately 8-1/4" X 6-3/16". |
||||
|
|
||||
|
Tee Joint Both sections assembled with "Snaplock" seam. Can be easily turned to make a secure lock. |
||||
|
||||
|
