Flame XTD 1.1 Steel Wood Burning Stove

Heats up to 1,500 square feet of space, with a maximum heat output of 42,000 BTUs. This model is mobile home approved (Fresh Air Kit required). Its firebox is 1.6 cubic feet and hold a maximum log length of 16 inches. The unit meets EPA standards for low emissions. Full Specifications and Features for this Stove can be found below.
*For full details on the Tax Credit Program see our Woodstove/Pellet Stove Federal Consumer Tax Credit Information page

Specifications

Type of fuel

Wood

Recommended surface

550 to 1500 sq. ft.

Maximum output - EPA test wood

47,100 BTU

Maximum output - seasoned cord wood

55,000 BTU

Color

Metallic black

Exterior dimensions

22¼"W x 22¾"D x 30¼"H

Exhaust pipe diameter

Type of chimney

2,100 deg. F (1150 deg. C)

Recommended chimney diameter

Minimum chimney height

12' (3,66 m)

Firebox dimensions

18¼"W x 14"D

Log positioning

Width

Maximum log length

16"

Door opening dimensions

16"W x 8¼"H

Type of door

Glass with cast iron frame

Glass surface

13¾"W x 7¾"H

Steel thickness

¼"

Warranty

Limited lifetime

Test standard - safety

ULC S-627, UL 1482

Test standard - emissions

EPA Method 28

Minimum Clearances
Single Wall Chimney Connector from Stove to Combustibles		Double Wall Pipe from Stove to Combustibles
Rear	17"	Rear	12"
Side	15"	Side	12"
Corner	10"	Corner	7"
Top*	84"	Top	84"
* Measured from floor.

Features:

Durable plate steel construction
Solid cast iron door
Self-cleaning glass system offering an exceptional view of the flame
Unique and easy-to-use air control
Integrated heat exchangeur with hot air outlet on top
Easy cleaning with large and accessible ash drawer
Mobile home approved
Optimum efficiency : 77%
Limited Lifetime Manufacturers Warranty